,

Permanent RROD Repair guide xbox 360



For this repair you also need
-Torx 8 Screwdriver/T8
-Torx 10 Screwdriver/T10
-A small flat screwdriver to open the back

This repair will work on allmost all RROD’s especially on the ones with 0102 0020 as secondary code. It CAN also fix the one red light in the right bottom with an error code on screen like “e74” but only if it’s the GPU if it’s the ANA or HANA chip it can’t (unless you’re lucky with overheating)

I already fixed 12 xbox 360’s like this but you have to use heatpaste because all things like that will make the fix permanent. Otherwise it will not last long, same thing when you don’t overheat. Of course you can put alternative heatsyncs under the memory chips and tricks like that but it isn’t the SOURCE of the problem, however it can be good to do.

You can also do this without attaching the motherboard to the steel case, like explained. If you want to do that use screws with a flat top which doen’t get smaller 10 mm long (without the top) don’t put STEEL washers under the motherboard if you do this.

The “aggresive cleaning stuff” is cleaning spirit or something similar.

The xbox worked for over a year and then got another error code, the GPU died completely…

Feel free to ask questions.




source

Leave a Reply

Your email address will not be published. Required fields are marked *

How to Fix Error Code 0x80004005 in Windows 7 only both for 32bit and 64 bit 2020

"Disk Could Not Be Partitioned" Boot Camp Assistant Error Fix